Compact 12V DC Air Conditioner for Minivans, Off-Road Vehicles, and More

Product Description: The air conditioner's casing is made of ultra-high hardness ABS material, which is not easy to deform and has an atmospheric and beautiful appearance. The bottom of the air conditioner has two adjustable support feet that can be adjusted to achieve a parallel state after installation.

The thickness of the air conditioner is 14.5 cm, and the overall streamlined design greatly reduces wind resistance during driving. The smooth lines make it look more integrated with the car.

The 12V DC Roof Air Conditioner has the following parameters: Compressor: Vortex electric compressor Voltage: 12V Starting current: 75A Power: 600 watts Refrigeration capacity: 6500 BTU/1800W Refrigerant type: R134a/400g Compressor speed: 2650 rpm Weight: 30 kg

Matters Needing Attention: - The starting current of the 12V air conditioner shall reach 75A. Before purchasing, please confirm whether the battery meets the requirements. - Before adding refrigerant, vacuum treatment (15-20 minutes) is required, and then add refrigerant. - There is no refrigerant inside the air conditioner, so R134a/400g should be added.

Installation Steps: 1. Skylight size: approximately 20 * 40 cm. Actual measurement is required before opening the hole. 2. Clean the sunroof: Clean the area around the sunroof and then stick the sealing strip. Then use glass glue to apply a circle on the inside and outside of the sealing strip to prevent water leakage on rainy days. 3. Install the host: Put the air conditioner host into the sunroof, and then adjust the two support feet at the bottom of the air conditioner to make the air conditioner flat. Leave the power cord outside the car. 4. Fixed air conditioner: Next, enter the car. There are two screw holes next to the bottom air outlet of the air conditioner. Screw the long screws of the accessory package into the holes. Then the accompanying accessories include a black fixing rod, which is inserted into a long screw at both ends and then clamped onto the roof to secure the air conditioner. 5. Plug in wiring harness: Connect the wiring harness that extends from the bottom of the air conditioner to the panel. Decorative panels and panels need to be combined before inserting connectors, otherwise it will affect the next step of operation. 6. Installation panel: The air conditioning panel and decorative panel are combined together, and then the air conditioning panel is inserted into the air outlet channel at the bottom of the air conditioner. 7. Fixed panel: Use black screws to secure the four corners of the panel. 8. Add refrigerant: Vacuum treat for 15-20 minutes, then turn on the air conditioning and add R134a refrigerant 400g. 9. Power cord: Do not connect the positive and negative poles of the power cord incorrectly. The red color of the power cord represents the positive pole/the black color represents the negative pole. A 12V battery requires an output current of around 75A. You can use a multimeter to test whether the current output of the battery is sufficient.

This new type of roof electric air conditioner shell is made of ABS material, and the whole machine is of streamlined design, with smooth overall lines. The side rhombus air outlet increases the air intake. The condenser is enlarged and widened, with a length of 55 * width of 15 cm. The thickened copper tube evaporator is 75 * 33 cm long. The vortex integrated electric compressor provides better air conditioning refrigeration when the weather is hot outside, with low power consumption.

The bottom panel is equipped with a strip integrated air outlet, and an air inlet motor is installed at the side, which can swing back and forth automatically, and supply air in a large angle and multi-direction. In the super-strong mode, the temperature of the air outlet can reach 16°C. The HD digital panel display offers multi-mode and multi-gear adjustable functions to meet a variety of application scenarios. An air duct is added between the base plate and the trim panel, which makes the installation easier.

The whole machine is 75.5 cm long, 67 cm wide, and 14.5 cm high, suitable for small sunroof models.

product information: