1. 12V Air Conditioner 9000BTU for Semi Trucks, Pickup, Trucks, Car, RV, Vans, Buses 2. 12 Volt Mini Split Air Conditioner for Semi Trucks, Pickup, Trucks, Car, RV, Vans, Buses 3. 12 Volt DC Air Conditioner for Semi Trucks, Pickup, Trucks, Car, RV, V

Install the External Machine: Start by removing the casing, then mark the drilling position. Use an 8mm drill to create the necessary holes, and use a riveting tool to fix the rivet nut at each drilling point. Next, install shock pads and sleeves at the holes of the external machine, and then fix the external machine to the car.

Install the Expansion Valve: Remove the iron sheet at the position of the expansion valve of the evaporator, and then fix the expansion valve to the evaporator. The two black screws should correspond to the two holes, so there is no need to worry about incorrect installation. Lastly, wrap the expansion valve in black cotton wrap.

Install the Indoor Unit: First, install the wooden board to the indoor wall, and then mount the evaporator on the wooden board.

Install High & Low Pressure Pipelines: Begin by opening a 50mm hole in the car, and then install the rubber cover with three holes. The thick pipe is the low pressure pipe and should be connected to the compressor, while the thin tube is the high pressure pipe and should be connected to the condenser. Next, connect the other ends of the high and low pressure pipes to the holes corresponding to the expansion valve of the indoor unit. Use long black screws and iron sheets to clamp the aluminum joints, and then tighten the screws.

Install the Connection Line: Connect the connection lines of the internal and external units, plug the power cord plugs into each other, and then connect the drain pipe of the evaporator.

Vacuuming/Adding Refrigerant: The system needs to be vacuumed for 15-20 minutes, and then refrigerant R134a (600g) should be added. The refrigerant can be added according to the pressure value. Generally, after the R134a refrigerant is injected into the air conditioning system, the pressure at the low pressure port should be 35psi, and the pressure at the high pressure port should be 140-180psi.

Connect the Power Cord to the Battery: Connect the power cord to the battery, being mindful of the positive and negative poles. Avoid connecting them in reverse, with the positive (+) and negative (-) terminals. It is forbidden to connect the power cord to the power-off switch or the power switch.

Test to see if it works: Start the Air Conditioner to check if it is functioning properly. If the current is insufficient, the refrigerant is too much or not enough, the control panel will display a code, which can help with quick troubleshooting.

Product Details: - Model: B0CVZQMZ4P - Part Numbers: EAC001.28, EAC001.30, EAC001.32, EAC001.33, EAC.001.12.24.R - Rated Input Power: 960W, 800W, 750W, 720W, 960W, 850W - Rated Current: 40-60A, 40A, 45-60A, 30-60A, 80A, 30-40A - Cooling Capacity: 3000W, 2600W, 1800W, 2100W, 2100W, 2000W - BTU: 10000, 9000, 6000, 7000, 8000, 6000

Customer Reviews: 4.0 out of 5 stars (5 reviews)

Price: $759.99, $623.60, $769.99, $779.99, $659.99

product information: